Rode NT6

Peşin Fiyatına Taksit

Compact Condenser Microphone

Özellikler:

1/2in (externally biased) gold sputtered true condenser capsule

Heavy-duty satin-finished, nickel-plated body

2-position variable pad: 0dB and -10dB

2-position variable high-pass filter: flat and 80Hz

Surface mount technology

Low noise

Wide dynamic range

Full frequency response

Designed & manufactured in Australia

Teknik Özellikler:

Operation Power: The NT6 is designed to operate from phantom power to the P48 standard. The NT6 will operate between 44V and 52V applied with positive polarity to pin 2 and pin 3 of the output XLR connector.

Output Impedance: The NT6 will operate satisfactorily into a load impedance as low as 1 k . If a load below this is used, the output signal level will be reduced. The NT6 output is balanced between pin 2 (hot) and pin 3 (cold). Pin 1 is ground.

Acoustic Principle: Externally polarised 1/2in (13mm) pressure gradient condenser

Directional Pattern: Cardioid

Frequency Range: 40Hz-20,000Hz selectable HPF @ 80 Hz/12 dB/octave

Output impedance: 200

Signal noise ratio din iec 651: 75 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)

Equvalent noise: 19 dB SPL (per IEC651, IEC268-15)

Maximum spl: 138 dB (@ 1 THD into 1 k )148 dB (@ 1 THD into 1 k ) - pad at maximum

Sensitivity: -38 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB

Dynamic range din iec 651: 119dB (per IEC651, IEC268-15)

Power supply voltage: 48V (P48)

Weight: 386 grm.

16111314050001